Power Supply 24V 1.1A

Power Supply 24V 1.1A

$19.20

Description

If you’re looking to supply a stable power to your project, you will definitely need one of this. The power supply comes in a metal casing, which is great for ventilation and heat dissipation. Setting up is very simple, just connect the AC cable to the input and output wires to your setup. There is a potentiometer inside the casing to allow for small tuning of voltage if necessary.

FEATURES

  • Universal AC input / Full range
  • Protections: Short circuit / Overload / Over voltage
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • All using 105°C long life electrolytic capacitors
  • Withstand 300VAC surge input for 5 second
  • High operating temperature up to 70°C
  • Withstand 5G vibration test
  • No load power consumption<0.5W
  • High efficiency, long life and high reliability
  • 3 years warranty

NOTE:

  1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature
  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor
  3. Tolerance: includes set up tolerance, line regulation and load regulation
  4. Line regulation is measured from low line to high line at rated load
  5. Load regulation is measured from 0% to 100% rated load
  6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “”EMI testing of component power supplies”” (as available on http://www.meanwell.com)
  7. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft)

OUTPUT:

  • DC Voltage: 24V
  • Rated Current: 1.1A
  • Current Range: 0 ~ 1.1A
  • Rated Power: 26.4W
  • Ripple & Noise (max) [Note 2]: 120mVp-p
  • Voltage Adj. Range: 22 ~ 27.6V
  • Voltage Tolerance [Note 3]: ±1.0%
  • Line Regulation [Note 4]: ±0.5%
  • Load Regulation [Note 5]: ±0.5%
  • Setup, Rise Time: 1800ms, 23ms/230VAC; 4000ms, 30ms/115VAC at full load
  • Hold Up Time (Typ.): 80ms/230VAC; 14ms/115VAC at full load

INPUT:

  • Voltage Range: 88 ~ 264VAC; 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage)
  • Frequency Range: 47 ~ 63Hz
  • Efficiency (Typ.): 86%
  • AC Current (Typ.): 0.7A/115VAC; 0.4A/230VAC
  • Inrush Current (Typ.): COLD START 30A/230VAC
  • Leakage Current: <2mA / 240VAC

PROTECTION:

  • Overload: 110 ~ 180% rated output power; Protection type : Hiccup mode, recovers automatically after fault condition is removed
  • Over Voltage: 27.6 ~ 32.4V; Protection type : Shut off o/p voltage, clamping by zener diode

ENVIRONMENT:

  • Working Temperature: -20 ~ +70°C (Refer to “”Derating Curve””)
  • Working Humidity: 20 ~ 90% RH non-condensing
  • Storage Temperature, Humidity: -40 ~ +85°C, 10 ~ 95% RH
  • Temperature Coefficient: ±0.03%/°C (0 ~ 50°C)
  • Vibration: 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC [Note 6]:

  • Safety Standards: UL60950-1, TUV EN60950-1.1, EAC TP TC 004, CCC GB4943.1, BSMI CNS14336-1 approved
  • Withstand Voltage: I/P-O/P:3KVAC; I/P-FG:2KVAC; O/P-FG:0.5KVAC
  • Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
  • EMC Emission: Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, GB9254 class B, GB17625.1, EAC TP TC 020, CNS13438 Class B
  • EMC Immunity: Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A, EAC TP TC 020

OTHERS:

  • MTBF: 309.7Khrs min.      MIL-HDBK-217F (25°C)
  • Dimension: 78*51*28mm (L*W*H)
  • Weight: 0.2kg

Shipping List

  • 1x Power Supply 24V 1.1A